Search Results

This paper first traces the early development of aviation engines in various countries. The six-cylinder Mercedes, V-type twelve-cylinder Renault, and six-cylinder Benz engines are then described in detail and illustrated. Various types of Sunbeam, Curtiss, and Austro-Daimler are also described. The effect of offset crankshafts, as employed on the Benz and Austro-Daimler engines, is illustrated by pressure and inertia diagrams and by textual description. The paper concludes with a section on the requirements as to size of aviation engines, four curves showing the changing conditions which affect the engine size requirements. These curves relate to variations of temperature, air density, engine speed, airplane speed and compression ratio required to compensate for decrease in air density, all as related to varying altitude.

This paper deals only with water-cooled engines, the cooling system being considered as made up of four main units-the water jacket, the circulating system, the radiator and the fan. Water-jacket problems are first considered, followed by a comparison of pump and gravity (thermosyphon) systems of circulation. The next section is devoted to radiator requirements. The balance of the paper relates to the fan. Five curves show graphically the correlations of the various factors of cooling, power consumed, air velocity and volume, engine speed, fan speed, air and water temperatures and the element of time, the results applying to different types and sizes of fans. These curves are of service in the selection of fans for radiator cooling purposes. The classification of fans, fan power consumption and speed, fan belts and pulleys, disadvantages of high fan speed, types of fan bearings, and applications of fans are the subjects next taken up.

The forces necessary to induce and maintain gasoline engine speeds of 3000 r.p.m. or faster, as well as other forces closely associated with high speeds, are numerous. The author has, however, confined his discussion to the three most important groups of forces upon which, in the main, the smooth running and the life of an engine depend. The different component forces were determined in respect to two engines of equal capacity for twenty-four crank positions, uniformly spaced at intervals of 30 degrees, which constitutes two revolutions and one complete cycle in the case of four-stroke cycle engines. Medium-sized six and twelve-cylinder engines were chosen for investigation. Corresponding components were combined as resultant forces and graphically represented in magnitude and direction. Several such characteristic diagrams of the resultant forces acting upon crankpins and main bearings of the two engines investigated are reproduced throughout the paper.

This paper contains a brief description of the Entz electric transmission. Wiring connections are given of the several speeds, for electric braking, for starting the engine and for charging the battery. The statement is made that the electric transmission eliminates and does the work of the friction clutch, the clutch pedal, the transmission gears, the flywheel and separate starting and lighting systems.

The efficiency of the automobile engine, as operated on the Otto cycle, is thought by the author to be too low, and he therefore suggests a method of improving it. He considers the various losses by which heat is dissipated in internal-combustion engines and finds that the best opportunity for increasing thermal efficiency is by an increased expansion of the charge. The author suggests that this expansion be carried 50 per cent further than is ordinarily done. In order to obtain higher efficiency at part load, the suggestion is made that instead of throttling the mixture, the admission valves be closed earlier. In case the expansion is 50 per cent longer than the induction stroke and the cut-off takes place earlier as the load becomes lighter, it will be necessary to vary the fuel opening inversely with the air induced. It is suggested that the fuel valve and cut-off lever be connected together and operated by the accelerator pedal or hand lever on the steering wheel.

After a brief consideration of airplane-engine practice in France, England and Germany, the author outlines the problems encountered in designing a twelve-cylinder aviation engine. He explains at some length the difficulties in determining the connection between propeller and engine and shows why valve-in-head location was chosen. Such features of engine design as the mounting of carbureter and exhaust pipes, methods of fuel and lubricant supply and details involved in selecting the lighting, starting and ignition equipment are considered.

The paper gives the value of certain factors in engine design that are good practice and uses these values to calculate the horsepower of a four-cylinder engine. The author holds that the deciding factor in comparing four-cylinder engines with those of the same displacement but with a greater number of cylinders, is the thermal efficiency. Both the cooling medium and the mechanical losses increase in proportion to the number of cylinders. He suggests in closing, that the demand for power output beyond the possibilities of four cylinders must be met by the use of a greater number.

The author confines his discussion to engines used on pleasure cars, inasmuch as practically all commercial vehicles use the four-cylinder type. The performance expected of their cars by automobile owners is outlined, particularly as regards performance, durability and maintenance cost. In-asmuch as the horsepower required is often determined by the acceleration demanded, the argument in favor of four-cylinder engines is based mainly on a comparison of its acceleration performance with those of engines having a larger number of cylinders. A number of acceleration curves are given for these engines. The paper next considers smoothness of operation at low, medium and high running speeds, asserting that the decrease in inertia forces due to lighter reciprocating parts has made it possible to increase the speed and thus reduce remarkably the vibration of the four-cylinder engine.

The author describes a number of detailed developments that took place during the working out of a line of worm-driven trucks. The details of front axle and steering parts are dealt with at length, the reasons for the final constructions being clearly explained and the constructions themselves well illustrated. Details concerning difficulty with the Hotchkiss type of drive on heavy trucks, troubles with drive-shafts and lubrication of the worm wheel are all covered thoroughly; spring-shackle construction and lubrication, radiator and hood mounting come in for detailed attention and the question of governors is interestingly covered. Brief reference is made to the influence of unsprung weight, the differences between truck and pleasure car practice in this respect being pointed out.

The author outlines the constructions that have performed cially that four-cylinder engines carried under a hood are the most satisfactory. The defects revealed by war service are given in considerable detail, the author finding that all of the trucks used had developed some weak point. Radiators and springs are specified as a general source of trouble. The author outlines a number of operating troubles developed under the existing conditions of operation and gives examples of the way these have been remedied. Considerable attention is paid to the methods of operating trucks away from made roads. The methods of fitting chains to the wheels, and the use of caterpillar attachments are described. Dimensions are given for bodies and a number of suggestions made as to their proper construction.

The results are given of laboratory investigations made of a number of different types of carbureters, showing the relation between their gasoline and air consumptions over a wide range. This relation is plotted on so-called quality diagrams, on which is indicated the range between which high power and high efficiency can be expected. A description is given of a carbureter arranged in two stages, the first being used at light load and the second coming into action when the throttle is nearly open, thereby more than doubling the carbureter capacity. Engine performance curves are presented showing the result when only one or both stages of this carbureter are used.

The author limits his consideration of rear axles to that of the bevel-gear type and takes up the subject under the heads of load-carrying member, gearing, driving-shaft, brakes and materials. Several different forms of cast and pressed axle housings are briefly described. Mention is then made of the axle gearing and data given showing the end thrust for straight-tooth bevel pinions. The methods of supporting pinions and of attaching bevel gears to the differential are discussed. Forms of differentials are considered, several different conventional types being illustrated. The subject of driving shafts is briefly reviewed, as is also that of brakes and brake materials. The author concludes his paper by figures showing the tensile strength, elastic limit and elongation of the metals used in the various parts of the rear axle and also explains some oil-retaining and dust-protecting features of design.

The author considers the effects of velocity variation on the operation of a car and states that this variation is absorbed mainly by the flywheel. A formula is given for calculating the pressure on universal bearings. Various methods of protecting and lubricating joints are described. A number of European types of joints are illustrated. A much larger number of types of joints are used abroad in-asmuch as each maker usually makes his own design instead of purchasing it from a specialist as is the usual practice in this country. In conclusion the paper describes types of joints using flexible material, such as leather or spring steel.

The author outlines in a general way the relation of car performance to modern engine development. He considers particularly weight reduction and torque performance of high-speed engines, giving the undesirable characteristics attending the increased torque range gained by higher speed. He next discusses the relation of torque to total car weight, to acceleration and to hill-climbing ability and suggests a method of determining the value of a car in terms of its performance ability. The author holds incorrect those systems in which the amount of lubrication is in proportion to speed only; and in which oil for crankshaft and crankpin bearings must cool as well as lubricate them. He shows a system designed to solve these oiling problems. Static, running and distortion balance of a rotating mass are defined by the author, who shows how they apply to a large number of types of crankshafts.

The author gives a brief review of developments during the past year in the construction of aeroplanes, particularly as affected by the European War. He takes as an example the Renault twelve-cylinder engine, citing the respects in which the present differs from previous models. Such factors as the changes in cooling systems, method of drive, valve construction and starting devices are considered. The requirements of aeroplane engines, such as constant service, high speeds (of aeroplanes) and stream-line form of engines and radiators, are outlined. Propeller requirements are dealt with at length, curves being given by which the efficiency and diameter of the propeller can be obtained. In conclusion a number of different engine installations are illustrated and compared.

The authors point out the need for more concrete data concerning the physical properties of bronze alloys and present an extensive chart covering the results of actual tests on a large range of cast bronze alloys. The influence of the method of making the test-specimen is discussed and it is hinted that new evidence concerning the proper interpreting of the true proportional limit is available. A very extensive set of microphotographs illustrates the variety of structures existing in the ordinary and in some unusual bronze alloys.

In this paper the author gives the results of an investigation of coarse crystallization. This investigation was carried out with commercial materials such as cold-drawn wire, hot and cold-rolled sheet, strip steel, cold-drawn tube and cold-pressings. The results of other investigations are briefly outlined. Coarse crystallization, or grain-growth, it is stated, is due to the action of a limited amount of strain, exceeding the elastic limit, followed by annealing within certain temperature ranges. The experimental work which led to this conclusion is explained in detail in the paper. The effect of forging, cold-drawing, cold-rolling and cold-pressing was determined with commercial materials. Some study was made of the effect of carbon on grain-growth and of the effect of coarse crystallization on the physical properties. In the discussion of commercial materials special reference is made to those used in motor car construction.

The author outlines the factors leading to the present high cost of automobile fuel, states that the introduction of new distillation processes will not solve the problem, but that the development of kerosene-utilizing appliances will produce results satisfactory to everybody. It is stated why kerosene cannot be used on the present gasoline cars. The adaptation of the gasoline automobile engine to the use of heavier fuels than will vaporize without the use of heat is entirely a problem of heating and heaters. The author reviews at length the principles embodied in and the construction of the heated vaporizers or vaporizing heaters now used in stationary and traction kerosene engines and in alcohol engines, giving illustrations of a number of such devices. After thus developing what in his opinion are desirable and good principles, the author describes a form of vaporizer embodying such principles, which he states has had successful trials (both block and road) in automobile service.